1. Suzuki S KY, Ueda K, Watanabe F. Marginal and internal fit of three-unit zirconia fixed dental prostheses: Effects of prosthesis design, cement space, and zirconia type. J Prosthodont Res. 2020;64(4):460-7. [DOI:10.1016/j.jpor.2019.12.005] [PMID]

2. Song KH IY, Lee JH, Lee J, Lee HH. Evaluation of mold-enclosed shear bond strength between zirconia core and porcelain veneer. Dent Mater J. 2018 ;37(5):783-8. [DOI:10.4012/dmj.2017-339] [PMID]

3. Ramos CM CP, Lia Mondelli RF, Tabata AS, de Souza Santos J, Sanches Borges AF. Bond strength and Raman analysis of the zirconia-feldspathic porcelain interface. J Prosthet Dent. 2014;112(4):886-94. [DOI:10.1016/j.prosdent.2014.02.009] [PMID]

4. Gundugollu Y YR, Krishna MH, Kalluri S, Pydi SK, Tedlapu SK. Comparison of the effect of monolithic and layered zirconia on natural teeth wear: An in vitro study . J Indian Prosthodont Soc. 2018 ;18(4):336-42. [DOI:10.4103/jips.jips_105_18] [PMID] []

5. Yotsuya M. TY, Sato T., Yasuda H., Sinya A., Sase T. . Evaluation of fitness of anterior zirconia ceramic bridge frame fabricated from intraoral digital impression. Shikwa Gakuho. 2014;114:227-8.

6. Schley JS HN, Reich S, Fischer J, Haselhuhn K, Wolfart S. Survival probability of zirconia-based fixed dental prostheses up to 5 yr: a systematic review of the literature. Eur J Oral Sci 2010;118(5):443-50. [DOI:10.1111/j.1600-0722.2010.00767.x] [PMID]

7. Esquivel-Upshaw JF KM, Hsu SM, Abdulhameed N, Jenkins R, Neal D, Ren F, Clark AE. . Randomized clinical study of wear of enamel antagonists against polished monolithic zirconia crowns. . J Dent. 2018;68:19-27. [DOI:10.1016/j.jdent.2017.10.005] [PMID] []

8. Kolakarnprasert N KM, Kim DK, Zhang Y. New multi-layered zirconias: Composition, microstructure and translucency. Dent Mater. 2019;35(5):797-806. [DOI:10.1016/j.dental.2019.02.017] [PMID] []

9. Y Z. Making yttria-stabilized tetragonal zirconia translucent. Dent Mater J. 2014;30:1195-203. [DOI:10.1016/j.dental.2014.08.375] [PMID] []

10. Contrepois M SA, Bartala M, Laviole O. . Marginal adaptation of ceramic crowns: a systematic review. . J Prosthet Dent. 2013;110(6):447-54. [DOI:10.1016/j.prosdent.2013.08.003] [PMID]

11. Özal Ç UM. In-vitro evaluation of marginal and internal fit of 3-unit monolithic zirconia restorations fabricated using digital scanning technologies. . J Adv Prosthodont. 2021;1384-373(6)10. [DOI:10.4047/jap.2021.13.6.373] [PMID] []

12. Chokr H, Alshaarani F, Husein HA. Evaluation of the Marginal Fit of Computer-Aided Design (CAD) and Computer-Aided Manufacturing (CAM) Zirconia Bridges Fabricated With Different Firing Cycles of Veneering Porcelain: An In Vitro Study. Cureus. 2023;15(2):e34842. [DOI:10.7759/cureus.34842] [PMID] []

13. Rödiger M HA, Bürgers R, Rinke S. . Fitting accuracy of zirconia single crowns produced via digital and conventional impressions-a clinical comparative study. . Clin Oral Investig 2017;21:579-87. [DOI:10.1007/s00784-016-1924-y] [PMID]

14. Önöral Ö UM, Seker E, Etikan İ. Influence of repeated firings on marginal, axial, axio-occlusal, and occlusal fit of metal-ceramic restorations fabricated with different techniques. J Prosthet Dent. 2018;120:415-20. [DOI:10.1016/j.prosdent.2017.11.022] [PMID]

15. Fransson B, Oilo G, Gjeitanger R. The fit of metal-ceramic crowns, a clinical study. Dent Mater. 1985;1(5):197-9. [DOI:10.1016/S0109-5641(85)80019-1] [PMID]

16. Martins LM, Lorenzoni FC, Melo AO, Silva LM, Oliveira JL, Oliveira PC, Bonfante G. Internal fit of two all-ceramic systems and metal-ceramic crowns. J Appl Oral Sci. 2012;20(2):235-40. [DOI:10.1590/S1678-77572012000200019] [PMID] []

17. Beuer F, Naumann M, Gernet W, Sorensen JA. Precision of fit: zirconia three-unit fixed dental prostheses. Clin Oral Investig. 2009;13(3):343-9. [DOI:10.1007/s00784-008-0224-6] [PMID]

18. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J. 1971;131.11-107(3). [DOI:10.1038/sj.bdj.4802708] [PMID]

19. Rosentiel SF LM, Fujimoto Contemporary Fixed Prosthodontics. 5 ed: Mosby; 2015.

20. Benic GI, Sailer I, Zeltner M, Gütermann JN, Özcan M, Mühlemann S. Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic fixed partial dentures. Part III: Marginal and internal fit. J Prosthet Dent. 2019;121(3):426-31. [DOI:10.1016/j.prosdent.2018.05.014] [PMID]

21. S. R. Tooth-colored CAD/CAM monolithic restorations. . Int J Comput Dent 2015;18(2):131-46.

22. Holmes JR BS, Holland GA, Sulik WD. Considerations in measurement of marginal fit. . J Prosthet Dent. 1989;62(4):405-8. [DOI:10.1016/0022-3913(89)90170-4] [PMID]

23. Refaie A, Fouda A, Bourauel C, Singer L. Marginal gap and internal fit of 3D printed versus milled monolithic zirconia crowns. BMC Oral Health. 2023;23(1):448. [DOI:10.1186/s12903-023-03184-8] [PMID] []

24. Boitelle P, Tapie L, Mawussi B, Fromentin O. Evaluation of the marginal fit of CAD-CAM zirconia copings: Comparison of 2D and 3D measurement methods. J Prosthet Dent. 2018;119(1):75-81. [DOI:10.1016/j.prosdent.2017.01.026] [PMID]

25. Fasih P, Tavakolizadeh S, Sedaghat Monfared M, Sofi-Mahmudi A, Yari A. Marginal fit of monolithic versus layered zirconia crowns assessed with 2 marginal gap methods. J Prosthet Dent. 2023;130(2):250.e1-.e7. [DOI:10.1016/j.prosdent.2023.06.005] [PMID]

26. Rödiger M, Heinitz A, Bürgers R, Rinke S. Fitting accuracy of zirconia single crowns produced via digital and conventional impressions-a clinical comparative study. Clin Oral Investig. 2017;21(2):579-87. [DOI:10.1007/s00784-016-1924-y] [PMID]

27. Ueda K, Beuer F, Stimmelmayr M, Erdelt K, Keul C, Güth JF. Fit of 4-unit FDPs from CoCr and zirconia after conventional and digital impressions. Clin Oral Investig. 2016;20(2):283-9. [DOI:10.1007/s00784-015-1513-5] [PMID]

28. Schönberger J, Erdelt KJ, Bäumer D, Beuer F. Marginal and internal fit of posterior three-unit fixed zirconia dental prostheses fabricated with two different CAD/CAM systems and materials. Clin Oral Investig. 2017;21(8):2629-35. [DOI:10.1007/s00784-017-2064-8] [PMID]

29. Arezoobakhsh A, Shayegh SS, Jamali Ghomi A, Hakimaneh SMR. Comparison of marginal and internal fit of 3-unit zirconia frameworks fabricated with CAD-CAM technology using direct and indirect digital scans. J Prosthet Dent. 2020;123(1):105-12 [DOI:10.1016/j.prosdent.2018.10.023] [PMID]

30. Rinke S, Fornefett D, Gersdorff N, Lange K, Roediger M. Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings. Dent Mater J. 2012;31(4):601-9. [DOI:10.4012/dmj.2012-017] [PMID]